WLC WebUI to CLI Mappings – Part 1 WLAN TAB => WLAN

So as part of my CCIE Wireless Studies I found that my knowledge of the WLC CLI commands was quite limited and I struggled to find a complete resource of these mappings other than looking up multiple Cisco documentations. So I have been putting together a mapping of the WLC WebUI to CLI commands. I …

Continue reading WLC WebUI to CLI Mappings – Part 1 WLAN TAB => WLAN

Netscout Aircheck G2 V2 and Test Accessory

Last week Netscout released their Aircheck G2 V2 update (software update to the G2 for all customers with current support agreements, no need to purchase new hardware). What's New: This update brought with it: Captive Portal connectivity One of the features I have wanted to be brought to the Aircheck for awhile, allowing us to …

Continue reading Netscout Aircheck G2 V2 and Test Accessory

Traditional RSSI Location Vs Cisco’s Hyperlocation Accuracy Real World Results Part 2 – The Open Planned Office

Updated Noticed that someone turned on an ACL between the WLC and CMX so the Hyperlocation data did not correctly come through for this test. Updated the data below I previously wrote about Traditional RTLS vs Cisco's Hyperlocation in the real world for a walled office. This post is to put to the test the …

Continue reading Traditional RSSI Location Vs Cisco’s Hyperlocation Accuracy Real World Results Part 2 – The Open Planned Office

Conducting An Outdoor Site Survey Using Ekahau With A GPS Receiver.

Have you ever had to conduct a site survey for an outdoor area, it might be fine if only a very small area, clicking everywhere you stand/ walk, but imagine doing a city block or a mine site, this would be come very hard to manage. This is why site survey software normally supports a …

Continue reading Conducting An Outdoor Site Survey Using Ekahau With A GPS Receiver.