After one of my WiSM2’s crashed yesterday I had a request from Cisco TAC to supply the coredump from the controller. Whilst attempting to do this I ran into issues utilising TFTP which was due to the fact that my TFTP server didn’t support the size of the file I was trying to upload to it. Continue reading “WLC Transfer Coredump”
Unless you want to have to connect your survey AP to the network to reach the WLC (an therefore having UTP cabling everywhere) or carry around and power a WLC to each survey point you will need an Autonomous AP. This Autonomous AP should be the same model that you plan on installing.
This post will detail how to setup and configure a site survey AP.